Product Highlights
The 6.5VDC output fills a specific niche for devices that operate at a voltage between standard 5V and 12V levels — a requirement found in certain metering accessories, interface boards, and legacy telemetry devices. The dual-panel input and large 50Ah battery make the SPS-6-65 a dependable choice for higher-draw or lower-sunlight deployments where energy reserve is critical.
Installation follows the same simple process as all SPS-6 products: mount the enclosure and panels on the supplied bracket and connect the load to the pre-wired interface circuit board.
Features
- 6.5VDC regulated output — 1A maximum output for devices requiring a regulated 6.5V supply.
- Dual 30W solar panel input — two panels provide robust charging for higher-load or lower-sunlight conditions.
- 50Ah battery with ~two-week holdover — sustains a 20mA load for approximately two weeks with no additional sunlight.
- Complete turn-key solution — includes two solar panels, bracket, charge controller, interface circuitry, battery, enclosure, and hardware.
- Pre-wired NEMA 4X ABS enclosure — 16" x 12" x 6" raintight and dustproof housing with all components pre-installed.
- ~6-hour battery recharge time — rapidly restores battery capacity under good solar conditions.
- Temperature range -38°C to +70°C — rated for demanding outdoor environments.


6.5VDC Dual-Panel Solar Supply
Can't Find What You're Looking For?





























