Features

RM-1S Remote Reset Switch - 6' (BNC)
RM-2S Remote Reset Switch - 9' (BNC)

The RM-1S Remote Reset Switch is a normally closed push button switch. The RM-1S will connect directly to an input BNC of any Radian standard or to the RM-1S input of the RM-1N Solid State Meter Interface. The RM-1S may also be connected to port A of a RM-111 Automated Comparator in which case it can remotely toggle the enter and cancel keys in order to start, stop and reset any Radian Standard. The switch component of the RM-1S is hermetically sealed to provide increased reliability during field use. The push-button has a tactile feel to provide instantaneous feedback of switch actuation.

Pulse Input Cables and Adapters
For connection to pulse output of standard

RM-1C Input Cable - 6' (BNC-BNC)
RM-2C Input Cable - 9' (BNC-BNC)
RM-3C Input Cable - 4' (BNC-BNC)
RM-1G Gang Test Adapter (includes 2' BNC-BNC and BNC T-Connector)
BNC "T"-Connector (RR#5200004), BNC Elbow (RR#5200007)

Communication Cables and Adapters
For connection to 4-pin I/O receptacles on standards and portable test systems

RM-7C I/O Cable for Multifunction Standards - 3'
RM-1L 4-Pin to 4-Pin Jumper Cable (RR#100020)
4-Pin "T" Connector (RR#5090030)

For connection to RD2x serial port
194201 Serial Communication Cable - DB9F shell connection to RJ45 connection. Application: Used to connect the serial port of a personal computer to the serial input of the RD-20/21/22.

Cables, Leads and Adapters for RD Standards

Voltage, Aux Power, and low current (32 amps max) cables and connectors.
The following cables are single input, available in different lengths, either red or black. They are rated at 600V, CAT II, 32 Amps with 4 mm insulated banana connectors on both ends. They can mate to alligator connectors (5210206B, 52102207R),4mm to 6 mm converter (5210209), or 4mm to spade adapters (5300082, 5300083). Applications: Used to connect the voltage test signal to the potential input of the RD standard, supply auxiliary power in the field and/or jumper the potential signal or auxiliary power signal from one standard to another. Can be used (with 5210209) to jumper the current signal from one RD standard to another.

9 ft current cable, 6 mm insulated connector on	PART #		DESCRIPTION
	5210210		Black single input voltage/current cable, 10 ft length.
	5210211		Red single input voltage/current cable, 10 ft length.
Black 5210202 Red 5210203	5210204		Black single input voltage/current cable, 6.5 ft length.
	5210205		Red single input voltage/current cable, 6.5 ft length.
	5210212		Black single input voltage/current cable, 3.25 ft length.
Black 190078 Red 190077	5210213		Red single input voltage/current cable, 3.25 ft length.
	5210202		Black single input voltage/current cable, 1 ft length.
	5210203		Red single input voltage/current cable, 1 ft length.
Black 5300082 Red 5300083	190077		Red 4mm banana to spade voltage/current cable, 18 inch. Application: Connect RD standard to voltage/current sources or older vintage standards.
	190078		Black 4mm banana to spade voltage/current cable, 18 inch.
	5210206		Black single insulated 4mm to alligator clip adapter. Application: Adapts 4mm banana to connect to voltage/current sources or older vintage standards.
Black 5210206 Red 5210207	5210207		Red single insulated 4mm to alligator clip adapter.
	5300082		Red single insulated 4mm to spade adapter. Application: Adapts 4mm banana to connect to voltage/current sources or older vintage standards.
5210209	5300083		Black single insulated 4mm to spade adapter.
	5210209		Red 4mm to 6mm banana converter. Application: Converts the standard 4mm banana plug to 6mm current inputs on RD standard.
	194015		120 VAC Auxiliary Power input cable for RD standard. Length is 10 feet. Application: Supply auxiliary power to the RD standard from a wall outlet.
194015	5300017		Red 4 mm insulated banana plug. Application:Repair existing voltage cable or create custom voltage lead lengths. ( Available in Black: 5300018 )
	High Currrent Leads and Connectors: 6 AWG wire,flexible silicon jacket
	5460060		Right Angle Current Adapter, .25 inch to 6mmApplication: Used to adapt existing .25 inch stud current connectors to 6mm plugs. Provides a low profile current input to RD standards. Ideal for existing load boxes.
5460060	190080		Current Jumper, 6 mm to .25 inch, 2 ft length.Application: Connect current from an RD standard to a standard with .25 inch inputs.
	190074		0.25 ft Current Jumper, 6 mm insulated connectors on both ends. Application: Used to jumper two current inputs of an RD standard when running current into multiple inputs.
190080	190082		1.25 ft Current Jumper, 6 mm insulated connectors on both ends. Application: Connect current from one RD standard to another.
	190090		3 ft current cable, 6 mm insulated connector on ONE end ONLY. Application: Used to conect to the current input of an RD standard. Second end of cable can be adapted by customer to fit current source.
190082	190091		6 ft current cable, 6 mm insulated connector on ONE end ONLY.
	190092		9 ft current cable, 6 mm insulated connector on ONE end ONLY.
190090	5210200		Insulated 6 mm Current Plug with No Sleeve Application: Used to repair existing high current leads or to create custom high current lead lengths.
	5210201		Sleeve for 6 mm current plug SN# 5210200
5210200 and 5210201
	Analog Sense and Communications Cables
	194014		Mini jack to BNC cable. Length = 10 feet. Application: Used to connect analog signal output of an energy meter to the Analog Sense Input BNC connector of the RD standard.
194014	194100		Black Alligator and Red Alligator to BNC cable. Length = 10 feet. Application: Used to connect analog signal output of an energy meter to the Analog Sense Input BNC of the RD standard.
	194201		Serial Communication Cable – DB9F shell connection to RJ45 connection. Application: Used to connect the serial port of a personal computer to the serial input of the RD standard.
1941000

Overview